Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 212)

-212-
floors
Specify the altitude in floor.
<Meters or floors>
Altitude value.
meters
Specify the altitude in meters.
Default:
0
Usage Guide:
To configure altitude of LLDP-MED
Example:
To configure altitude (Floors 5) of LLDP-MED
Switch# configure terminal
Switch (config)# lldp med location-tlv altitude floors 5
4.2.91 lldp med location-tlv elin-addr
Command:
lldp med location-tlv elin-addr <ELIN number>
lldp LLDP configurations.
med
Media Endpoint Discovery
location-tlv
LLDP-MED Location Type Length Value parameter
elin-addr
Emergency Location Identification Number, (e.g. E911 and others), such as defined by TIA or NENA.
<ELIN number>
ELIN value
Default:
0
Usage Guide:
To configure Emergency Location Identification Number of LLDP-MED
Example:
To configure Emergency Location Identification Number (911) of LLDP-MED
Switch# configure terminal
Switch (config)# lldp med location-tlv elin-addr 911