Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 367)

-367-
ntp
Configure NTP
status
status
Default:
N/A
Usage Guide:
To display the NTP Server information.
Example:
To display the NTP Server information.
Switch # show ntp status
NTP Mode : enabled
Idx Server IP host address (a.b.c.d) or a host name string
--- ------------ ------------------------------------------
1 19 2.168.0.44
2
3
4
5
4.20.64 show platform phy
Command:
show platform phy [ interface ( <port_type> [ <port_type_list> ] ) ]
show
Show running system information
platform
Platform specific information
phy
PHYs' information
interface
Search by port
Default:
N/A
Usage Guide:
To display the PHY information.
Example:
To display the PHY information for GigabitEthernet 1/1.