Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 368)

-368-
Switch # show platform phy interface GigabitEthernet 1/1
Port API Inst W AN/LAN/1G Mode Dupl ex S peed Link
---- -------- - --------- ---- ------ ----- ----
1 Default 1G ANEG - - No
4.20.65 show platform phy failover
Command:
show platform phy failover
show
Show running system information
platform
Platform specific information
phy
PHYs' information
failover
Failover status
Default:
N/A
Usage Guide:
To display the PHY failover status.
Example:
To display the PHY failover status.
Switch # show platform phy failover
Port Active Channel Broadcast After reset
---- ------ ------- --------- ------- -----
4.20.66 show platform phy id
Command:
show platform phy id [ interface ( <port_type> [ <port_type_list> ] ) ]
show
Show running system information
platform
Platform specific information
phy
PHYs' information
id
id