Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 192)

-192-
Usage Guide:
To enable IPMC profile
Example:
To enable IPMC profile
Switch# configure terminal
Switch (config)# ipmc profile
4.2.77 ipmc profile <word16>
Command:
ipmc profile <word16>
ipmc IPv4/IPv6 multicast configuration
profile
IPMC profile configuration
<word16>
Profile name
Default:
Disabled
Usage Guide:
To enter IPMC profile mode
Example:
To enter IPMC profile mode (interlogix)
Switch# configure terminal
Switch (config)# ipmc profile interlogix
Switch (config-ipmc-profile)#
4.2.77.1 default range
Command:
default range <EntryName : word16>
default
Set a command to its defaults
range
A range of IPv4/IPv6 multicast addresses for the profile