Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 176)

-176-
To configure NetBIOS Name Server of DHCP Server.
Example:
To configure NetBIOS Name Server (192.168.1.10) of DHCP Server for pool “nsswitch”.
Switch# configure terminal
Switch (config)# ip dhcp pool nsswitch
Switch (config-dhcp-pool)# netbios-name-server 192.168.1.10
4.2.56.15 netbios-node-type
Command:
netbios-node-type b-node | h-node | m-node | p-node
netbios-node-type
Net BIOS node type
b-node
Broadc ast node
h-node
H ybrid node
m-node
Mixe d node
p-node
Pe er-to-peer node
Default:
None
Usage Guide:
To configure NetBIOS node type of DHCP Server.
Example:
To configure NetBIOS node type (B-node) of DHCP Server for pool “nsswitch”.
Switch# configure terminal
Switch (config)# ip dhcp pool nsswitch
Switch (config-dhcp-pool)# netbios-node-type b-node
4.2.56.16 netbios-scope
Command:
netbios-scope <LINE>
netbios-scope
NetBIOS scope