Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 219)

-219-
Usage Guide:
To enable Loop Protection
Example:
To enable Loop Protection
Switch# configure terminal
Switch (config)# loop-protect
4.2.102 loop-protect shutdown-time
Command:
loop-protect shutdown-time <0-604800>
loop-protect Loop protection configuration
shutdown-time
Loop protection shutdown time interval
<0-604800>
Shut down time in second
Default:
180
Usage Guide:
To configure shutdown time interval of Loop Protection
Example:
To configure shutdown time interval (888) of Loop Protection
Switch# configure terminal
Switch (config)# loop-protect shutdown-time 888
4.2.103 loop-protect transmit-time
Command:
loop-protect transmit-time <0-10>
loop-protect Loop protection configuration
transmit-time
Loop protection transmit time interval
<1-10>
Transmit time in second