Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 233)

-233-
network-clock
net work-clock
clk-source
clk-source - commands related to a specific clock source.
<clk-source : 1-2>
Clock source number
nominate
Nominate a clk input to become a selectable clock source.
clk-in Nominate the station clock input as a source. The PCB104 SyncE module supports 10 MHz station clock input
interface
Nominate an ethernet interface as a source
Default:
None
Usage Guide:
To configure Nominated mode of network-clock
Example:
To configure Nominated mode of network-clock for interface GigabitEthernet 1/2
Switch# configure terminal
Switch (config)# network-clock clk-source 1 nominate interface GigabitEthernet 1/2
4.2.126 network-clock clk-source <clk-source> priority
Command:
network-clock clk-source <clk-source> priority <0-1>
network-clock
net work-clock
clk-source
clk-source - commands related to a specific clock source.
<clk-source : 1-2>
Clock source number
priority
Priority of nominated clock sources
<0-1>
Priority number
Default:
0
Usage Guide:
To configure priority of network-clock
Example:
To configure priority (1) of network-clock (source 1)