Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 161)

-161-
mld
Multicast Listener Discovery
snooping
Snooping MLD
query-interval
Query Interval in seconds
<IpmcQi : 1-31744>
1 - 31744 seconds
Default:
125
Usage Guide:
To configure Querier-interval of MLD snooping for specific VLAN
Example:
To configure Querier-interval (600 seconds) of MLD snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 mld snooping query-interval 600
4.2.49.25 ipv6 mld snooping query-max-response-time
Command:
ipv6 mld snooping query-max-response-time <IpmcQi : 1-31744>
ipv6 IPv6 configuration commands
mld
Multicast Listener Discovery
snooping
Snooping MLD
query-max-response-time
Query Response Interval in tenths of seconds
<IpmcQri : 0-31744>
0 - 31744 tenths of seconds
Default:
125
Usage Guide:
To configure Querier-interval of MLD snooping for specific VLAN
Example:
To configure Querier-interval (60 seconds) of MLD snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X