Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 287)

-287-
To enable the Restricted TCN of CIST
Switch# configure terminal
(config)# spanning-tree aggregation
(config-stp-aggr)# spanning-tree restricted-tcn
4.2.177 switchport vlan mapping
Command:
switchport vlan mapping <group> <vlan_list> <translation_vlan>
switchport
Set switching mode characteristics
vlan
vlan - Vlan translation
mapping
Add VLAN translation entry into a group
<group id : 1-29>
Group id
<vlan_list>
VLAN list
< translation_vlan >
translation VLAN ID
Default:
None
Usage Guide:
To configure the VLAN Translation
Example:
To enable the VLAN Translation (below table)
Switch# configure terminal
Switch (config)# switchport vlan mapping 1 3 5
4.2.178 tacacs-server deadtime
Command:
tacacs-server deadtime <minutes>