Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 293)

-293-
Default:
4
Usage Guide:
To configure the TTL of UPnP
Example:
To configure the TTL (8) of UPnP
Switch# configure terminal
Switch (config)# upnp ttl 8
4.2.187 username
Command:
username <username> privilege <priv> password {
encrypted <encry_password> |
none | unencrypted <password> }
username
Establish User Name Authentication
<Username : word31>
User name allows letters, numbers and underscores
privilege
Set user privilege level
<privilegeLevel : 0-15>
User privilege level
password
Specify the password for the user
encrypted
Specifies an ENCRYPTED password will follow
none
NULL password
unencrypted
Specifies an UNENCRYPTED password will follow
<Password : word4-44>
The ENCRYPTED (hidden) user password. Notice the
ENCRYPTED password will be decoded by system internally. You cannot directly use it as
same as the Plain Text and it is not human-readable text
Default:
None
Usage Guide:
To configure the Profiles of Username
Example:
To configure the Profiles of Username (Username: 1234, Password: 1234, Privilege Level: 15)