Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 334)

-334-
interface
Interface status and configuration
vlan
VLAN status
Default:
N/A
Usage Guide:
To display the MAC address and IP address of specific VLAN.
Example:
To display the MAC address and IP address for all VLANs.
Switch # show interface vlan
VLAN1
LINK: 00-30-1F-33-1A-9d Mtu:1500 <UP BROADCAST RUNNING MULTICAST>
IPv4: 192.168.0.100/24 192.168.0.255
IPv6: fe80:2::201:c1ff:fe00:9900/64 <ANYCAST TENTATIVE AUTOCONF>
4.20.23 show ip arp
Command:
show ip arp
show
Show running system information
ip
Internet Protocol
arp
Address Resolution Protocol
Default:
N/A
Usage Guide:
To display the ARP table.
Example:
To display the ARP table for all.
Switch # show ip arp
192.168.0.45 via VLAN1:d4-3d-7e-fd-e3-ac