79 show running-config – Interlogix NS3702-24P-4S Command Line Guide User Manual
Page 379
-379-
Switch # show rmon statistics 1
Statistics ID : 1
---------------------
Data Source : .1.3.6.1.2.1.2.2.1.1.5
etherS tatsDropEvents :
3
etherS tatsOctets
:
10221727
etherS tatsPkts :
127086
etherS tatsBroadcastPkts :
45280
etherS tatsMulticastPkts :
70008
etherS tatsCRCAlignErrors :
0
etherS tatsUndersizePkts :
0
etherStatsOversizePkts : 0
etherS tatsFragments :
0
etherStatsJabbers : 0
etherStatsCollisions : 0
etherS tatsPkts64Octets :
26017
etherS tatsPkts65to127Octets : 101063
etherS tatsPkts128to255Octets : 5
etherS tatsPkts256to511Octets : 1
etherS tatsPkts512to1023Octets : 0
etherS tatsPkts1024to1518Octets: 0
4.20.79 show running-config
Command:
show running-config [ all-defaults ] [feature <feature_name> [ all-defaults ]]
[interface vlan <list> [ all-defaults ] ] [line { console | vty } <list> [ all-defaults ]]
[vlan <list> [ all-defaults ]]
show
Show running system information
running-config
Show running system information
all-defaults Include most/all default values
feature
Show configuration for specific feature
<feature_name> Valid words are 'GVRP' 'access' 'access-list' 'aggregation' '
arp-inspection' 'auth' 'clock'
'dhcp' 'dhcp-snooping''dhcp_server' 'dns' 'dot1x' 'eps' 'erps' 'evc' 'green-ethernet' 'http' 'icli'