88 show snmp view, 89 show spanning-tree – Interlogix NS3702-24P-4S Command Line Guide User Manual
Page 391
-391-
Switch # show snmp user
User Name : default_user
Engine ID :
800007e5017f000001
Security Level : NoAuth, NoPriv
Authentication Protocol : None
Privacy Protocol :
None
4.20.88 show snmp view
Command:
show snmp view [ <view_name> <oid_subtree> ]
show
Show running system information
snmp
Display SNMP configurations
view
MIB view configuration
<ViewName : word32>
MIB view name
<OidSubtree : word255>
MIB view OID
Default:
N/A
Usage Guide:
To display the SNMP viewer information.
Example:
To display the SNMP viewer information.
Switch # show snmp view
View Name : default_view
OID Subtree : .1
View Type : included
4.20.89 show spanning-tree
Command:
show spanning-tree [ summary | active | { interface ( <port_type>
[ <port_type_list> ] ) } | { detailed [ interface ( <port_type> [ <port_type_list> ] ) ] } |