Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 289)

-289-
Switch# configure terminal
Switch (config)# tacacs-server host interlogix.com port 55 timeout 6 key 7788
4.2.180 transport email authentication
Command:
transport email authentication username <username> password <password>
transport
Enable or disable transport email function.
email
Enable or disable transport email function.
authentication
configure SMTP authentication's username and password
<Username>
User name allows letters, numbers and underscores
<Password>
The ENCR YPTED (hidde n) user p assword. Notic e th e ENC RYPTED p assword will b e d ecoded by
system internally. You cannot directly use it as same as the Plain Text and it is not human-readable text
normally.
Default:
N/A
Usage Guide:
To configure SMTP authentication's username and password
Example:
To configure SMTP authentication's username ([email protected]) and password (456)
Switch# configure terminal
Switch (con fig)# transport email authentication username [email protected]
password 456
4.2.181 transport email from
Command:
transport email from <mail_addr> subject <title>
transport
Enable or disable transport email function.
email
Enable or disable transport email function.
from
sender's email address