Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 211)

-211-
To configure Datum type of LLDP
Example:
To configure Datum type (nad83-mllw) of LLDP
Switch# configure terminal
Switch (config)# lldp med datum nad83-mllw
4.2.89 lldp med fast
Command:
lldp med fast <1-10>
lldp LLDP configurations.
med
Media Endpoint Discovery
fast
Number of times to repeat LLDP frame transmission at fast start.
Default:
4
Usage Guide:
To configure frame transmission time of LLDP
Example:
To configure frame transmission time (6) of LLDP
Switch# configure terminal
Switch (config)# lldp med fast 6
4.2.90 lldp med location-tlv altitude
Command:
lldp med location-tlv altitude [floors <Meters or floors>] | [meters <Meters or floors>]
lldp LLDP configurations.
med
Media Endpoint Discovery
location-tlv
LLDP-MED Location Type Length Value parameter
altitude
Altitude parameter