Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 284)

-284-
Example:
To enable the Admin Edge of CIST Aggregated Port
Switch# configure terminal
Switch (config)# snmp-server host interlogix
Switch (config-snmps-host)# spanning-tree edge
4.2.176.8 spanning-tree link-type
Command:
spanning-tree link-type link-type { point-to-point | shared | auto }
spanning-tree
Spanning Tree protocol
link-type
Port link-type
auto
Auto detect
point-to-point
Forced to point-to-point
shared
Forced to Shared
Default:
Point to Point
Usage Guide:
To configure the Point to Point mode (Shared) of CIST Aggregated Port
Example:
To configure the Point to Point mode (Shared) of CIST Aggregated Port
Switch# configure terminal
Switch (config)# snmp-server host interlogix
Switch (config-snmps-host)# spanning-tree link-type shared
4.2.176.9 spanning-tree mst <instance> cost
Command:
spanning-tree mst <instance> cost { <cost> | auto }
spanning-tree
Spanning Tree protocol
mst
STP bridge instance
<Instance : 0-7>
instance 0-7 (CIST=0, MST1=1...)