Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 363)

-363-
Loop Detected: Port 5 shut down
4.20.59 show loop-protect
Command:
show loop-protect [ interface ( <port_type> [ <port_list> ] ) ]
show
Show running system information
loop-protect
Loop protection configuration
interface
Interface status and configuration
Default:
N/A
Usage Guide:
To display the Loop protection information.
Example:
To display the Loop protection information for GigabitEthernet 1/1.
Switch # show loop-protect interface GigabitEthernet 1/1
Loop Protection Configuration
======================================
Loop Protection : Enable
Transmission Time : 2 sec
Shutdown Time : 2 sec
GigabitEthernet 1/1
------------------------------
Loo p protect mode is enabled.
Actions are both of shutdown and log.
T ransmit mode is enabled.
No loop.
The number of loops is 12390.
T ime of last loop is at 1970-01-01T14:58:28+00:00
S tatus is down.