Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 399)

-399-
Default:
N/A
Usage Guide:
To display the MAC-based VLAN information.
Example:
To display the MAC-based VLAN information.
Switch # show vlan mac
MAC Address VID Interfaces
----------- --- --------- -
00-40-55-00-00-00 1 GigabitEthernet 1/1
4.20.99 show vlan protocol
Command:
show vlan protocol [ eth2 { <etype> | arp | ip | ipx | at } ] [ snap { <oui> | rfc-1042 |
snap-8021h } <pid> ] [ llc <dsap> <ssap> ]
show
Show running system information
vlan
VLAN status
protocol
Protocol-based VLAN status
eth2
Ethernet protocol based VLAN status
<etype>
Ether Type(Range: 0x600 - 0xFFFF)
arp
Ether Type is ARP
at
Ether Type is AppleTalk
ip
Ether Type is IP
ipx
Ether Type is IPX
llc
LLC-based VLAN status
<dsap>
DSAP (Range: 0x00 - 0xFF)
<ssap>
SSAP (Range: 0x00 - 0xFF)
snap
SNAP-based VLAN status
<oui>
SNAP OUI (Range 0x000000 - 0XFFFFFF)
rfc-1042
SNAP OUI is rfc-1042
snap-8021h
SNAP OUI is 8021h
<pid>
PID (Range: 0x0 - 0xFFFF)
Default: