Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 298)

-298-
Switch# configure terminal
Switch (config)# vlan ethertype s-custom-port 0x88a9
4.2.190 vlan protocol
Command:
vlan protocol { { eth2 { <etype> | arp | ip | ipx | at } } | { snap { <oui> | rfc-1042 |
snap-8021h } <pid> } | { llc <dsap> <ssap> } } group <grp_id>
vlan
VLAN commands
protocol
Protocol-based VLAN commands
eth2
Ethernet-based VLAN commands
<0x600-0xffff>
Ether Type(Range: 0x600 - 0xFFFF)
arp
Ether Type is ARP
at
Ether Type is AppleTalk
ip
Ether Type is IP
ipx
Ether Type is IPX
llc
LLC-based VLAN group
<0x0-0xff>
DSAP (Range: 0x00 - 0xFF)
<0x0-0xff>
SSAP (Range: 0x00 - 0xFF)
snap
SNAP-based VLAN group
<0x0-0xffffff>
SNAP OUI (Range 0x000000 - 0XFFFFFF)
rfc-1042
SNAP OUI is rfc-1042
snap-8021h
SNAP OUI is 8021h
group
Protocol-based VLAN group commands
<grp_id>
Group Name (Range: 1 - 16 characters)
Default:
None
Usage Guide:
To configure the Protocol-based VLAN
Example:
To configure the Protocol-based VLAN (below table)