Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 241)

-241-
Switch# configure terminal
Switch (config)# poe management mode lldp-consumption
4.2.138 poe sequential enable
Command:
poe sequential enable
poe
Power Over Ethernet
sequential
PoE sequential is to delay power feeding when the switch is completely booted.
enable
poe sequential enable
Default:
Enabled
Usage Guide:
To enable Sequential Power up Option.
Example:
To enable Sequential Power up Option.
Switch# configure terminal
Switch (config)# poe sequential enable
4.2.139 poe sequential interval
Command:
poe sequential interval <1-30>
poe
Power Over Ethernet
sequential
PoE sequential is to delay power feeding when the switch is completely booted.
interval
Set how long system should feeding power to next PoE interface <1-30>
<1-30>
poe sequential enable
Default:
5