Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 44)

-44-
To clear the Switch’s spanning-tree detected-protocols for all.
Switch# clear spanning-tree detected-protocols interface *
4.1.42 clear spanning-tree detected-protocols interface *
Command:
clear spanning-tree detected-protocols interface *
Default:
N/A
Usage Guide:
To clear the spanning-tree detected-protocols for all.
Example:
To clear the Switch’s spanning-tree detected-protocols for all.
Switch# clear spanning-tree detected-protocols interface *
4.1.43 clear spanning-tree detected-protocols interface
GigabitEthernet
Command:
clear spanning-tree detected-protocols interface GigabitEthernet <PORT_LIST>
<PORT_LIST>
Port list in X/X-XX
Default:
N/A
Usage Guide:
To clear the spanning-tree detected-protocols for specific GigabitEthernet port.
Example:
To clear the Switch’s spanning-tree detected-protocols for specific GigabitEthernet 1/1.