Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 210)

-210-
4.2.87 lldp holdtime
Command:
lldp holdtime <2-10>
lldp LLDP configurations.
holdtime
Sets LLDP hold time (The neighbor switch will discarded the LLDP information after "hold time" multiplied
with "timer" seconds ).
<2-10>
2-10 seconds
Default:
4
Usage Guide:
To enable LLDP hold time
Example:
To enable LLDP hold time (5)
Switch# configure terminal
Switch (config)# lldp holdtime 5
4.2.88 lldp med datum
Command:
lldp med datum nad83-mllw | nad83-navd88 | wgs84
lldp LLDP configurations.
med
Media Endpoint Discovery
datum
Datum (geodetic system) type
nad83-mllw
Mean lower low water datum 1983
nad83-navd88
North American vertical datum 1983
wgs84
World Geodetic System 1984
Default:
WGS84
Usage Guide: