Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 370)

-370-
1 No No
4.20.68 show port-security port
Command:
show port-security port [ interface ( <port_type> [ <port_type_list> ] ) ]
show
Show running system information
port-security
port-security
port
Show MAC Addresses learned by Port Security
interface
Search by port
Default:
N/A
Usage Guide:
To display the MAC Addresses of Port Security.
Example:
To display the MAC Addresses of Port Security.
Switch # show port-security port interface GigabitEthernet 1/1
GigabitEthernet 1/1
-------------------
MAC Address VID State Added Age/Hold Time
----------------- ---- ---------- -------- ----------------- -------------
<none>
4.20.69 show port-security switch
Command:
show port-security switch [ interface ( <port_type> [ <port_type_list> ] ) ]
show
Show running system information
port-security
port-security
switch
Show Port Security status
interface
Search by port
Default: