Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 184)

-184-
Switch# configure terminal
Switch (config)# ip igmp host-proxy leave-proxy
4.2.63 ip igmp snooping
Command:
ip igmp snooping
ip Internet Protocol
igmp
Internet Group Management Protocol
snooping
Snooping IGMP
Default:
Disabled
Usage Guide:
To enable IGMP Snooping.
Example:
To enable IGMP Snooping.
Switch# configure terminal
Switch (config)# ip igmp snooping
4.2.64 ip igmp snooping vlan
Command:
ip igmp snooping vlan <vlan_list>
ip Internet Protocol
igmp
Internet Group Management Protocol
snooping
Snooping IGMP
vlan
IGMP VLAN
<vlan_list>
VLAN identifier(s): VID
Default:
Disabled