Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 347)

-347-
Usage Guide:
To display the IP Routing table.
Example:
To display the IP Routing table.
Switch # show ip route
11.11.11.0/24 via 192.168.0.14 <UP GATEWAY HW_RT>
127.0.0.1/32 via 127.0.0.1 <UP HOST>
192.168.0.0/24 via VLAN1 <UP HW_RT>
224.0.0.0/4 via 127.0.0.1 <UP>
4.20.40 show ip source binding
Command:
show ip source binding [ dhcp-snooping | static ] [ interface ( <port_type>
[ <port_type_list> ] ) ]
show
Show running system information
ip
Internet Protocol
source
source command
binding
ip source binding
dhcp-snooping
learn from dhcp snooping
interface
ip source binding interface config
static
setting from static entries
Default:
N/A
Usage Guide:
To display the Static IP Source Guard Table.
Example:
To display the Static IP Source Guard Table.
Switch # show ip source binding interface GigabitEthernet 1/1