Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 272)

-272-
Switch (config)# snmp-server community v3 public 192.168.0.15 255.255.255.0
4.2.173 snmp-server contact
Command:
snmp-server contact <line255>
snmp-server Set SNMP server's configurations
contact Set the SNMP server's contact string
<line255>
contact string
Default:
None
Usage Guide:
To configure the sysContact string of SNMP
Example:
To configure the sysContact string (Server123) of SNMP
Switch# configure terminal
Switch (config)# snmp-server contact Server123
4.2.174 snmp-server engine-id
Command:
snmp-server engine-id local <Engineid : word10-32>
snmp-server Set SNMP server's configurations
engine-id Set SNMP engine ID
local
Set SNMP local engine ID
<Engineid : word10-32>
local engine ID
Default:
None