Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 262)

-262-
Example:
To configure the Weighted Random Early Detection (below table)
Switch# configure terminal
Switch (config)# qos wred queue 1 min-th 2 mdp-1 3 mdp-2 4 mdp-3 5
4.2.159 radius-server attribute 32
Command:
radius-server attribute 32 <Id : line1-253>
radius-server Configure RADIUS
32
NAS-Identifier
Default:
None
Usage Guide:
To configure the NAS-Identifier
Example:
To configure the NAS-Identifier (interlogix)
Switch# configure terminal
Switch (config)# radius-server attribute 32 interlogix
4.2.160 radius-server attribute 4
Command: