Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 307)

-307-
4.9 dot1x
4.9.1 dot1x initialize
Command:
dot1x initialize [ interface ( <port_type> [ <plist> ] ) ]
dot1x IEEE Standard for port-based Network Access Control
initialize
Force re-authentication immediately
Default:
N/A
Usage Guide:
To re-authenticate specific interface immediately.
Example:
To re-authenticate specific interface (GigabitEthernet 1/1) immediately.
Switch# dot1x initialize interface GigabitEthernet 1/1
4.10 enable
4.10.1 enable
Command:
enable
enable
Turn on privileged commands
Default:
None
Usage Guide:
To enter enable mode