Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 93)

-93-
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # lacp
4.2.48.41 lacp key
Command:
lacp key
<1-65535> | auto
lacp
Enable LACP on this interface
key
Key of the LACP aggregation
<1-65535>
Key value
auto
Choose a key based on port speed
Default:
Auto
Usage Guide:
To configure LACP key for specific interface
Example:
To configure LACP key (555) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # lacp key 555
4.2.48.42 lacp port-priority
Command:
lacp port-priority <1-65535>
lacp
Enable LACP on this interface
port-priority
LACP priority of the port
<1-65535>
Priority value, lower means higher priority
Default:
32768
Usage Guide:
To configure LACP port-priority for specific interface
Example: