Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 146)

-146-
Default:
Disabled
Usage Guide:
To enable Voice VLAN security for specific interface
Example:
To enable Voice VLAN security for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport voice vlan security
4.2.49 interface vlan
Command:
interface vlan <vlan_list>
vlan VLAN interface configurations
<vlan_list>
List of VLAN interface numbers, 1~4095
Default:
N/A
Usage Guide:
To enter the VLAN interface mode.
Example:
To enter the VLAN 1 interface mode
Switch# configure terminal
Switch (config)# interface vlan 1
Switch (config-if-vlan)#