Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 232)

-232-
Usage Guide:
To configure preferred negotiation of network-clock
Example:
To configure preferred negotiation (slave) of network-clock (source 1)
Switch# configure terminal
Switch (config)# network-clock clk-source 1 aneg-mode slave
4.2.124 network-clock clk-source <clk-source> hold-timeout
Command:
network-clock clk-source <clk-source> hold-timeout <3-18>
network-clock
net work-clock
clk-source
clk-source - commands related to a specific clock source.
<clk-source : 1-2>
Clock source number
hold-timeout
The hold off timer value in 100 ms.Valid values are range 3-18.
<3-18>
Value in 100ms. E.g 9 gives a hold timeput of 900 ms
Default:
None
Usage Guide:
To configure hold off timer of network-clock
Example:
To configure hold off timer (800 ms) of network-clock (source 1)
Switch# configure terminal
Switch (config)# network-clock clk-source 1 hold-timeout 8
4.2.125 network-clock clk-source <clk-source> nominate
Command:
network-clock clk-source <clk-source> nominate { clk-in | { interface <port_type>
<port> } }