Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 389)

-389-
19 S witch 1 - Port 19 GigabitEther net 1/19
20 S witch 1 - Port 20 GigabitEther net 1/20
21 S witch 1 - Port 21 GigabitEther net 1/21
22 S witch 1 - Port 22 GigabitEther net 1/22
23 S witch 1 - Port 23 GigabitEther net 1/23
24 S witch 1 - Port 24 GigabitEther net 1/24
25 Switch 1 - Port 25 10GigabitEthernet 1/1
26 Switch 1 - Port 26 10GigabitEthernet 1/2
27 Switch 1 - Port 27 10GigabitEthernet 1/3
28 Switch 1 - Port 28 10GigabitEthernet 1/4
29 S witch 1 - Port 29 GigabitEther net 1/25
50001 VLAN 1 vlan 1
60001 IP Interface 1 vlan 1
4.20.86 show snmp security-to-group
Command:
show snmp security-to-group [ { v1 | v2c | v3 } <security_name> ]
show
Show running system information
snmp
Display SNMP configurations
security-to-group
security-to-group configuration
v1
v1 security model
v2c
v2c security model
v3
v3 security model
<SecurityName : word32>
security group name
Default:
N/A
Usage Guide:
To display the SNMP Group information.
Example:
To display the SNMP Group information.
Switch # show snmp security-to-group
Security Model : v1
Security Name : public