67 show platform phy status – Interlogix NS3702-24P-4S Command Line Guide User Manual
Page 369
-369-
interface
Search by port
Default:
N/A
Usage Guide:
To display the PHY ID.
Example:
To display the PHY ID for GigabitEthernet 1/1.
Switch # show platform phy id interface GigabitEthernet 1/1
Port Channel API Base Phy Id Phy Rev.
---- ------- -------- ------- ------
1 0 0 (1g) 8634 0
4.20.67 show platform phy status
Command:
show platform phy status [ interface ( <port_type> [ <v_port_type_list> ] ) ]
show
Show running system information
platform
Platform specific information
phy
PHYs' information
status
status
interface
Search by port
Default:
N/A
Usage Guide:
To display the PHY status.
Example:
To display the PHY status.
Switch # show platform phy status interface GigabitEthernet 1/1
Port Issues seen during 1G PHY warmstart Issues during 10G PHY WS
---- -------------------------
---------- ------------------------