Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 331)

-331-
show interface <port_type> <port_type_list> status
show
Show running system information
interface
Interface status and configuration
status
Display status
Default:
N/A
Usage Guide:
To display the port status.
Example:
To display the port status for interface GigabitEthernet 1/1.
Switch # show interface GigabitEthernet 1/1 status
Interface Mode S peed & Duplex Ma x Frame Exc essive Li nk
---------------------- ------- --------------- ------- -- --------- --------
GigabitEthernet 1/1 enabled Auto 10056 Discard Down
4.20.19 show interface <port_type> <port_list> switchport
Command:
show interface <port_type> <port_list> switchport [ access | trunk | hybrid ]
show
Show running system information
interface
Interface status and configuration
switchport
Show interface switchport information
access
Show access ports status
hybrid
Show hybrid ports status
trunk
Show trunk ports status
Default:
N/A
Usage Guide:
To display the VLAN mode.
Example:
To display the VLAN mode for interface GigabitEthernet 1/1.