Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 366)

-366-
4.20.62 show network-clock
Command:
show network-clock
show
Show running system information
network-clock
Show selector state
Default:
N/A
Usage Guide:
To display the SyncE information.
Example:
To display the SyncE information.
Switch # show network-clock
Selector State is: Free Run
Alarm State is:
Clk: 1 2
LOCS: FALSE FALSE
SSM: F ALSE F ALSE
WTR: FALSE FALSE
LOL: FALSE
DHOLD: T RUE
SSM State is:
Interface T x SSM Rx SSM Mode
GigabitEthernet 1/1 QL_NONE QL_LINK Master
4.20.63 show ntp status
Command:
show ntp status
show
Show running system information