Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 239)

-239-
Switch# configure terminal
Switch (config)# ntp
4.2.135 ntp server
Command:
ntp server <1-5> ip-address { <ipv4_var> | <ipv6_var> | <name_var> }
ntp
Configure NTP
server
Configure NTP server
<1-5>
i ndex number
<hostname>
domain name
<ipv4_ucast>
ipv4 address
<ipv6_ucast>
ipv6 address
Default:
None
Usage Guide:
To configure the IP addresses of NTP Server
Example:
To configure the IP address (9.9.9.9) of NTP Server for index 1
Switch# configure terminal
Switch (config)# ntp server 1 ip-address 9.9.9.9
4.2.136 poe admin-mode enable
Command:
poe admin-mode enable
poe
Power Over Ethernet
admin-mode
Enable or disable global PoE management function.
enable
poe admin-mode enable
Default: