Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 92)

-92-
Switch (config-if) # ipv6 mld snooping max-groups 5
4.2.48.39 ipv6 mld snooping mrouter
Command:
ipv6 mld snooping mrouter [ automatic | fix | none]
mrouter
Multicast router port configuration
automatic
auto mode
fix
fix mode
none
none mode
Default:
Auto
Usage Guide:
To configure MLD router port mode for specific interface
Example:
To configure MLD router port mode (fix) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # ipv6 mld snooping mrouter fix
4.2.48.40 lacp
Command:
lacp
lacp
Enable LACP on this interface
Default:
Disabled
Usage Guide:
To enable LACP for specific interface
Example:
To enable LACP for GigabitEthernet X/X