Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 405)

-405-
Example:
To configure length of command display with 5 lines for current terminal session.
Switch # terminal length 5
Switch # show run
Building configuration...
username admin privilege 15 password none
loop-protect
-- more --, next page: Space, continue: g, quit: ^C
4.21.5 terminal width
Command:
terminal width <lines>
terminal
Set terminal line parameters
width
Set width of the display terminal
<lines:0 or 40-512>
Number of characters on a screen line (0 for unlimited width)
Default:
N/A
Usage Guide:
To configure width of command display for current terminal session.
Example:
To configure width of command display with 40 characters per line for current terminal session.
Switch # terminal width 40