Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 373)

-373-
Switch # show pvlan isolation
Port Isolation
-------------------------------- ---------
GigabitEthernet 1/1 Disabled
GigabitEthernet 1/2 Disabled
GigabitEthernet 1/3 Disabled
4.20.73 show qos
Command:
show qos [ { interface [ ( <port_type> [ <port> ] ) ] } | wred | { maps [ dscp-cos ]
[ dscp-ingress-translation ] [ dscp-classify ] [ cos-dscp ] [ dscp-egress-translation ] }
| { qce [ <qce> ] } ]
show
Show running system information
qos
Quality of Service
interface Interface
maps Global QoS Maps/Tables
cos-dscp Map for cos to dscp
dscp-classify Map for dscp classify enable
dscp-cos Map for dscp to cos
dscp-egress-translation Map for dscp egress translation
dscp-ingress-translation Map for dscp ingress translation
qce QoS Control Entry
<qce> QCE ID
wred W eighted Random Early Discard
Default:
N/A
Usage Guide:
To display the QoS configuration.
Example:
To display the QoS configuration for GigabitEthernet 1/1.
Switch # show qos interface GigabitEthernet 1/1
interface GigabitEthernet 1/1