Wall mounting, Unit is mounted to a wall. (refer to, P. 3-7 – Toa N-8000 Series Ver.1.41 User Manual
Page 103
3-7
Chapter 3: INSTALLATION & WIRING
2.3. Wall Mounting
Step 1. Install the supplied wall-mounting bracket to the N-8000MI using 4 removed screws from the case.
N-8000MI
Tapping screw 3 x 8
(removed from the case)
Tapping screw 3 x 8
(removed from the case)
Wall mounting bracket
(supplied with the N-8000MI)
Step 2. Mount the N-8000MI on the wall.
Notes
• Use appropriate screws for the construction of wall.
• Wood screws 3.5 x 20 are supplied with the N-8000MI.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
Wall surface
Cord clamp
Power supply cord
Wood screw 3.5 x 20
(supplied with the N-8000MI)
Protect against disconnection
(Power supply plug)
Unlock cord clamp and run the
power supply cord through it.
Note
Keep the cable length between a
power supply plug and cord clamp
as short as possible.