Toa N-8000 Series Ver.1.41 - Manual (Page 74)

2-22
Chapter 2: FUNCTIONS AND OPERATION
2.11. Group Blocking
Stations can be blocked into groups (up to 31 groups) which can or cannot make calls to each other. Paging
zone numbers available among such groups can also be set.
Note
Use the supplied N-8000 software to set the station groups, calls that can be made among groups, and paging
zones that can be mutually called. (Refer to
p. 5-62 .)
[Group blocking group setting example]
Set arbitrary station groups (up to 31 groups).
Group 1 No. 201 – 209
Group 2
No. 210 – 219
Group 3
Nos. 220 – 249
Group 4
No. 250 – 279
Group 1
Group 2 Group 3 Group 4
Calling station
Called station
Group 1
Group 2 Group 3 Group 4
All-zone call or paging to Zones 1 – 4
All-zone call or paging to Zone 1
Paging to Zone 4
Paging station Pageing zone
[Setting example for enabling or disabling calls among groups]
Calls that station groups can or cannot make to each other can be freely set. In this example, Group 1 can call
Groups 2 – 4 and Group 2 can call only Group 1. Groups 3 and 4 cannot call other groups.
[Setting example for paging zone numbers that can be called]
Paging zone numbers that can be called from each group can be freely set. In this example, Group 1 can
make all-zone calls or page Zones 1 – 4, Group 2 can make all-zone calls or page only Zone 1, and Group 4
can page only Zone 4.
Note
Paging zones can be set freely regardless of group blocking group assignment.