Toa N-8000 Series Ver.1.41 - Manual (Page 235)

6-21
Chapter 6: SYSTEM SETTINGS USING THE BROWSER
(4) User Data Change button
Pressing this button registers the newly changed user data.
([System Management Utility]
(1) Upload button
Used to write backed-up settings files into the exchange, multi interface unit, or IP station connected to the
PC. (refer to
p. 6-22 ).
(2) Browse button
A file selection dialog appears.
(3) Download button
Saves the equipment's settings data (files) to the PC (refer to p. 6-23 ).
(4) Delete All Settings button
Deletes all settings and returns the exchange to its initial factory settings shown below.
IP address: 192.168.1.1
System name: N-8000
Password:
guest
Confirm other settings online using the N-8000 software.
(5) Firmware Update button
Updates firmware (refer to p. 6-24 ).
Use the latest version of firmware, which is released on the following our web site.
Tips
• Download the latest version of firmware from our site http://www.toa-products.com/international/.
• The current version is displayed above the Firmware Update button.
(6) Clock retrieve button
Pressing this button displays the date and time of the connected PC's clock (refer to p. 6-25 ).
(7) Setting button
Used to set the equipment's clock (refer to p. 6-25 ).
(8) Restart button
Restarts the equipment.
Note
Never restart the equipment while changing settings files or performing a firmware update.