Toa N-8000 Series Ver.1.41 - Manual (Page 154)

5-10
Chapter 5: SYSTEM SETTINGS BY SOFTWARE
4. UNIT SCAN (NETWORK SETTINGS)
These functions enable the detection and network setting of Exchanges, Multi interface units, and IP stations
connected to the local area network.
The equipment detection function can only be used within the effective broadcast range (refer to
p.8-5 ).
Other equipment must be set using a different network setting (refer to p.4-13 ).
4.1. Screen Description
Click [Unit Scan (Network Settings)] on the initial screen.
The following shows an example of the screen displayed after equipment has been scanned, including a list of
scanned Exchanges, Multi interface units, and IP stations.
(1) Select
Marks the checkbox associated with the selected
corresponding equipment.
(2) MAC address
Displays the scanned equipment MAC address.
This address cannot be changed.
(3) Model
Displays the scanned equipment model number.
This model number cannot be changed.
(4) IP address
Displays the scanned equipment IP address.
(5) Subnet mask
Displays the subnet mask to be set for the
scanned equipment.
(6) Default gateway
Displays the default gateway to be set for the
scanned equipment.
(7) Web port
Displays the Web server's port number.
(8) Name
Displays the scanned equipment name.