P. 2-18 – Toa N-8000 Series Ver.1.41 User Manual
Page 70
2-18
Chapter 2: FUNCTIONS AND OPERATION
[Calls to stations set for time-based call forwarding]
Step 1. When the preset transfer time is reached, the station's display shows the station (e.g. number 62) has
entered the Time-based Call forwarding mode (N-8000MS/8500MS only).
Step 2. Calls to stations (original station) are automatically transferred to the transfer destination station
without sounding a call tone.
6 3 M a i n
e n t r a n c e
6 2
Transfer destination
station number
Transfer destination station name
Original station number
No. 61
No. 62
Original station number
Transfer destination station
6
2
Call tone
No. 63
0:00
12:00
6:00
8:00
18:00
16:00
Transfer time
zone
End time
Start time
Programming or erasure can be performed at your station.
[Programming]
4
3
X
X
+
+
+
(Confirmation tone)
Function designated
number
Transfer destination
station number
[Erasure]
4
3
Y
Y
+
+
+
(Confirmation tone)
The originally called (your) station number
Notes
• The station to which a call is to be transferred via multi interface unit cannot be programmed as a
transfer destination station.
• The programmed contents by dialing operation are automatically saved into the exchange or IP
stations at midnight every day. If the exchange or IP station is turned off before completion of save,
the state returns to the contents that were programmed before power-off.