Toa N-8000 Series Ver.1.41 - Manual (Page 46)

1-33
Chapter 1: GENERAL DESCRIPTION
8. PAGING FUNCTION OUTLINES
There are two types of paging: (1) PA paging by way of external PA equipment and (2) Station paging by way
of the station's internal speaker. Both types have access to the (1) zone paging function which pages one
zone, (2) the selectable paging function which pages multiple selected zones, and (3) the all-call paging
function which pages all zones simultaneously.
8.1. Paging Types
8.1.1. PA paging (Only when the N-8000EX/8000MI is used)
Connecting PA equipment to the N-8000EX exchange's or N-8000MI multi interface unit's output terminal
permits PA paging to be made by dial operation at the station.
8.1.2. Station paging
Performing dial operation at a station permits paging to be made to other stations' internal speakers.
When paging is made to stations engaged in conversation, its behavior depends on the following priority
modes, either of which can be selected: "Paging priority" that puts the busy stations on hold and allows them
to be paged, and "Conversation priority" that allows the paging to go through except the busy stations.
Use the supplied N-8000 Software program to perform the mode setting.
N-8000EX
N-8500MS
N-8000EX
LAN
PA paging
N-8000MI
PA paging
Station Paging
Station Paging