System function table, Basic functions – Toa N-8000 Series Ver.1.41 User Manual
Page 41
1-28
Chapter 1: GENERAL DESCRIPTION
Operation
–
Function
Conversation
Calls can be made or received by lifting the handset.
The desired party can be called by dialing its station
number.
Pressing the Redial key automatically redials the last
number called.
Only the N-8000MS/8500MS permits selection from
the most recent 10 numbers.
The last conversation partner can be recalled by
pressing the [#/ ] key regardless of whether the call
was made or received.
Only the N-8000MS/8500MS permits selection from
the most recent 10 numbers.
Holding down the Push-to-talk key while making a call
by means of a continuous call tone permits a voice
calling to be made to the called station. The voice
calling reverts to the original continuous tone call when
the Push-to-talk key is released.
When a station is assigned to a call group, if the
station is called, all stations within that group are
simultaneously called by a continuous call tone
regardless of their call receiving mode settings. If any
one of the stations within the group responds, calls to
the other stations stop.
Call
Handset
conversation
Individual call
Redialing
Recall
Voice calling
Group call
Permits conversations to be made without lifting the
handset when another party is called or when a call is
received in automatic connection mode.
Hands-free
conversation
Incoming
Call
Selection
Incoming calls are automatically connected after a
brief call tone (1 second) or without a call tone.
Calls continue with a continuous call tone (or without a
call tone) and a status indicator continuously flashes
as long as no response is made.
Automatic
connection
Continuous call
Description
Reference page
Pressing the Push-to-talk key during a hands-free
conversation enables one-way conversation from the
party who pressed the Push-to-talk key. Conversation
flow is reversed when the key is released. This
function makes announcements and conversations
possible to areas with a high ambient noise level.
PTT conversation
–
–
–
–
–
–
Setting
7. SYSTEM FUNCTION TABLE
7.1. Basic Functions
IP stations or the system consisting of Exchanges and stations makes the following functions available.
The pre-programmed master station can be called by
pressing the door station's call button.
Master station
call