Toa N-8000 Series Ver.1.41 - Manual (Page 214)

5-70
Chapter 5: SYSTEM SETTINGS BY SOFTWARE
8. SYSTEM CLOCK SETTINGS
The N-8000 software program allows the clocks for all exchanges, multi interface units, and IP stations
connected to the system to be set. To set exchange clocks individually (for example, if there is a time
difference between exchanges), use either the browser (refer to
p. 6-25 ), the N-8000MS Multifunctional
Master station, or the N-8500MS IP Multifunctional Master station (refer to p. 7-7 .)
• Synchronize the system clock with the PC clock through the following procedure. Make sure that the PC
clock has been set with the correct time beforehand.
Step 1. Click "Clock Setting" on the initial screen.
A clock-setting dialog is displayed, showing the PC's current time.
Step 2. Performs system clock settings.
Press "OK" to synchronize the clocks for all exchanges connected to the network with the PC clock.