Toa N-8000 Series Ver.1.41 - Manual (Page 59)

2-7
Chapter 2: FUNCTIONS AND OPERATION
2.2.4. Recall
The last conversation partner can be recalled by pressing the [ ] key regardless of whether the call was
made or received. Only the N-8000MS Multifunctional Master Station and the N-8500MS IP Multifunctional
Master Station permit selection from the most recent 10 numbers.
When using the N-8010MS/8011MS/8020MS/8031MS:
Press the [
] key to recall the last conversation
partner regardless of whether the call was made or
received.
When using the N-8000MS/8500MS:
Step 1. Press the [
] key to display the recent dial data of
the conversation partners regardless of whether the
call was made or received on the display.
Step 2. Use the Up and Down arrow keys to display the
desired dial number. Pressing the Down arrow key
displays the last ten numbers dialed in reverse
chronological order. They are numbered 0 – 9 from
top to bottom.
Step 3. Press either the Select or [ ] key to perform the
dial operation indicated on the display.
2.2.5. Voice callings
A voice call can be made to the called station while
making a call by means of a continuous call tone.
• Voice a call to a called party by pressing the Push-to-
talk key as the continuous call tone sounds.
The call tone stops as long as the Push-to-talk key is
pressed, enabling the called party to hear your voice.
• The original continuous call tone resumes as soon as
the Push-to-talk key is released.
Call
(The last conversation partner)
Call
Call
Hello, Mr. TOA.
Hello, Mr. TO
A.
Continuous call tone Continuous call tone
PTT
R e c a l l
0 : 1 0 0 8
R e c a l l
8 : 1 1 1 1
1 1 1 1 M a i n e n t r a n
C a l l i n g
[Example]
R e d i a l i n g
0 : 1 0 0 1
R e d i a l i n g
7 : 1 2 0 3
1 2 0 3 T O A
C a l l i n g
[Example]
When using the N-8000MS/8500MS station:
Step 1. Press the Redial key to display the most recently
dialed numbers on the display.
Step 2. Use the Up and Down arrow keys to display the
desired dial number. Pressing the Down arrow key
displays the last ten numbers dialed in reverse
chronological order. They are numbered 0 – 9 from
top to bottom.
Step 3. Press either the Select or Redial key to perform the
dial operation indicated on the display (individual
call, paging, etc.).