P. 2-35 – Toa N-8000 Series Ver.1.41 User Manual
Page 87
2-35
Chapter 2: FUNCTIONS AND OPERATION
1
9
BGM
BGM
Function designation number
1
9
BGM
BGM
Function designation number
[BGM volume adjustment]
BGM volume can be adjusted in 5 increments.
• Press [Function key][1][9][
] to increase the volume.
• Press [Function key][1][9][
] to decrease the volume.
4.5. External Equipment Control (only when the N-8000MI is used)
By transmitting a one-shot make signal or make/break signal to the designated contact of the Multi interface
unit through operation of the station, external equipment can be controlled. Remote door lock control can be
performed using the one-shot make output, and indication boards can be controlled using the make/break
output.
Note
Use the supplied N-8000 software to set the one-shot make duration, operation number digits, operation
numbers, and the stations allowed to control external equipment. (Refer to
Data receiving device
Door lock control
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
[Door remote control example using one-shot make output control]
[Hospital waiting status indication board example using the make/break output]