Toa N-8000 Series Ver.1.41 - Manual (Page 80)

2-28
Chapter 2: FUNCTIONS AND OPERATION
3.3.2. Zone number designation response
If the paged party responds dialing the designated zone number, the paging party who made the paging to the
designated zone last is called and put through to the paged party.
When making a paging, the paging party should announce the paging zone to use, and the paged party can
dial the designated zone number when responding.
[Operations]
Press the Paging Response key, followed by zone number paged.
Note
Enter a zone number with the same digit length (1 – 3 digits) set with the N-8000 Software program.
The paging party who made the paging to the designated zone last is called and put through to the paged
party.
[Example]
Zone 1 Zone 2
Speaker
Hello, Mr. TOA.
Please respond to Response 002.
0 0 2
(Zone number with
3-digit length)
The station that can make response is as follows.
• Station assigned to the paged zone
• Station connected to the same exchange as the station assigned to the paged zone or the PA paging output
are connected to.